![Brodie BiRotor Plus Installation & Operation Manual Download Page 5](http://html1.mh-extra.com/html/brodie/birotor-plus/birotor-plus_installation-and-operation-manual_2817567005.webp)
Page 5/26
IOM Single Case BiRotor Plus R06
Essential Instructions
General
Brodie Meter Co., LLC designs, manufactures and tests its
products to meet many international standards. As the
instruments are sophisticated technical products they must
be installed, used and maintained properly to ensure they
continue to operate within their normal specifi cations. The
following instructions must be adhered to and incorporated
into onsite safety programs where possible.
Read all instructions prior to installing, operating or
servicing the product. If the instruction manual is not the
correct one tel1 912 489 0200. Retain the
instruction manual for future reference.
If you do not understand any of the instructions, contact
your local Brodie representative for clarifi cation.
Follow all warnings, cautions and instructions marked on or
supplied with the product. It is the end users
responsibility to operate the instrument with in the
specifi cations as defi ned with in the instruction manual or
marked on the instruments name plates.
Install the equipment as specifi ed in the installation
instructions of the appropriate manual and in accordance
to local and national codes.
To ensure proper performance, use qualifi ed personnel to
install, operate, program and maintain the product.
Some types of equipment contain Carbon Steel, Cast Iron
and/or Aluminum wetted parts, these instruments are not
for use on water service.
It is the end users responsibility to assess the surface
temperature of the device when it is in service, and if
required take the necessary precautions to avoid personnel
injury or damage to other equipment.
When replacement parts are required, ensure that qualifi ed
people use replacement parts specifi ed by the
manufacturer. Unauthorised parts and procedures can
affect the products performance and place the safe
operation of the process at risk. Look alike substitution
may result in explosion, fi re, electrical hazards, improper
operation or personnel injury.
Use of this equipment for any other purpose than it is
intended for may result in property damage and/or serious
personal injury or death.