Broderson IC-80-3L 4X2, Installation And Operating Manual

Page: 17 / 75

1-13
Electrical System:
Standard:
12-Volt Battery:
Gas Units: Group 27 with 540 CCA rating
Diesel Units: Group 31 with 950 CCA rating
Instrument Group:
Located at operator's station and includes fuel gauge, hourmeter, and
bubble level. Hourmeter records hours only during actual engine operation.
Also included are: warning lights for low oil and transmission pressure, turn
signal, high beams, hazard lights, parking brake, hydraulic oil temperature,
battery, check engine, stop engine, coolant temperature, engine oil
pressure, transmission temperature, and outriggers.
Lighting Group:
Consists of two 12V lamps, with high and low beams for driving; integral
tail, brake and turn signal lights, and backup lights in rear; front turn signals
and emergency flasher switch at operator's station. 12V horn actuated by
button located on shifting control.
Back-Up Alarm:
Provides pulsating sound from a 102 dB alarm when ignition is on and
transmission is in reverse. Conforms to SAE J994b.
Outrigger Alarm System:
102 dB alarm with alternating two-tone sound is actuated by a switch when
the OUTRIGGER DOWN controls are operated.
Optional Electrical Accessories:
Strobe Lights:
Two yellow strobe lights, one on each side of turret weight box, for high
visibility all around crane. Flash 60-120 times per minute. Each strobe
draws only one-half amp. Includes operator-controlled switch.
Boom Work Lights:
Two work lights, one on left side of boom to light boom tip, and one on right
side of the turret to light ground under boom tip. Includes switch at
operator's station. Net Weight: 10 pounds (5 kg)
Work Lights Rear:
Two work lights recessed into rear bumper. Provides lighted work area to
rear of machine.
Courtesy of CraneMarket.com