Broco Prime-Cut, Operating Instructions Manual

Page: 3 / 32

TABLE OF CONTENTS
1.0 PURPOSE AND SCOPE
2.0 WARNINGS AND SAFETY PRECAUTIONS
2.1 Warnings
2.2 Safety Precautions
3.0 COMPONENTS
3.1 Required Equipment
3.2 Accessory Equipment
4.0 SETUP PROCEDURES
4.1 Preparing the Work Area
4.2 Pre-Assembly Inspection
5.0 ASSEMBLY PROCEDURES
5.1 Oxygen System
5.2 Battery
5.2.1 Slave Plug (600143)
5.3 Leather Shield (PC/LS)
5.4 Cutting Rod Insertion
5.5 16" Rod Extender (PC/TACXT16)
5.6 Hose/Cable Extension Kit (PC/EXMIL60)
6.0 OPERATING PROCEDURES
6.1 Cutting Rod Ignition
6.2 Techniques
6.2.1 Piercing
6.2.2 Cutting
6.2.3 Gouging
6.3 Shutdown
7.0 PRIME-CUT TORCH MAINTENANCE
7.1 Flash Arrestor & Flash Arrestor Screen
7.2 Coupler Assembly Removal/Replacement
7.3 Oxygen Control Valve Disassembly/Reassembly
7.4 Oxygen Control Valve Assembly Leak Testing Procedure
8.0 STRIKER PLATE ASSEMBLY
8.1 Inspection
8.2 Striker Plate Disassembly
8.3 Striker Plate Reassembly
9.0 TROUBLESHOOTING
9.1 Oxygen Leaks
9.2 Uneven Oxygen Flow
9.3 Cutting Rod Doesn't Fit Collet
9.4 Valve Stem Won't Move Freely
10.0 REPLACEMENT PARTS, SERVICE & REPAIR