4.2 Pre-Assembly Inspection
WARNING!
Never use any equipment which is unsafe or appears to be unsafe.
Always replace damaged or worn components to reduce the risk of injury.
Never operate the torch without the flash arrestor and flash arrestor screen in
place.
1.
Always inspect the oxygen hose for damage or wear prior to and immediately
following each use of the Prime-Cut system.
2.
Always inspect the ignition power cables and connectors for damage or wear
prior to and immediately following each use of the Prime-Cut system.
3.
Always inspect the torch for damage or wear prior to and immediately
following each use.
4.
Always inspect the collet, collet washer, flash arrestor and flash arrestor
screen prior to and immediately following each use of the Prime-Cut torch.
5.
Check the battery for leaks. Never use a leaking battery.
Summary of Contents for Prime-Cut
Page 32: ......
