3-2
SilkWorm 3800 Hardware Reference
Operating the SilkWorm 3800
3
LEDs On the Port Side of the Switch
The port side of the SilkWorm 3800 has the following LEDs:
•
One Switch Status/Power LED
•
One Port Status LED above each fibre channel port (left LED)
•
One Port Speed LED above each fibre channel port (right LED)
Figure 3-1 shows the port side of the SilkWorm 3800.
Figure 3-1
LEDs on Port Side of SilkWorm 3800
Table 3-1 describes the LEDs on the port side of the switch.
Switch Power/Status LED
Port Status LED (16x)
Port Speed LED (16x)
Table 3-1
Port Side LED Patterns During Normal Operation
LED Name,
Location
Color of LED
Status of Hardware
Recommended Action
Switch
Status/Power
LED
Below serial
port
No light
Switch is off, or boot is not
complete, or boot failed.
Verify switch is on and has
completed booting.
Steady green
Switch is on.
No action required.
Slow-flashing
green
(on 1 second;
off 1 second)
One or both of the following
are true:
•
One or more
environmental ranges
are exceeded.
•
Error log contains one
or more port diagnostic
error messages.
1.
Check environmental
conditions, error log, Port
Status LEDs, transceivers,
cables, and loopback plugs.
2.
Correct error condition.
3.
Clear error log.
4.
Rerun diagnostics to verify
fix.
Summary of Contents for SilkWorm 3800
Page 1: ...Publication Number 53 0001576 06 SilkWorm 3800 Hardware Reference Manual...
Page 28: ...2 16 SilkWorm 3800 Hardware Reference Installing and Configuring the SilkWorm 3800 2...
Page 36: ...3 8 SilkWorm 3800 Hardware Reference Operating the SilkWorm 3800 3...