42
Brocade NetIron CES and Brocade NetIron CER Hardware Guide
53-0000080-03
Device installation
3
FIGURE 36
Installing the Brocade device in a rack
I
Installation steps
1. Mount the device in the rack as illustrated in
Figure 36
.
2. Using a 2-hole grounding lug and a minimum #6 AWG grounding wire, ground the chassis to
either a common bonding network or an isolated bonding network.
3. Proceed to
“System power”
on page 43.
You will need the following tools for installation:
•
#2 Phillips-head screwdriver
•
Four #10-24 screws (or as specified by rack type) to mount the device to the rack
Summary of Contents for NetIron CER 2024C
Page 12: ...xii Brocade NetIron CES and Brocade NetIron CER Hardware Guide 53 0000080 03 In this chapter...
Page 90: ...78 Brocade NetIron CES and Brocade NetIron CER Hardware Guide 53 0000080 03 China A China...
Page 100: ...88 Brocade NetIron CES and Brocade NetIron CER Hardware Guide 53 0000080 03 Danger B...
