Brocade Communications Systems NetIron CER 2024C, Hardware Manual

Page: 30 / 110

18 Brocade NetIron CES and Brocade NetIron CER Hardware Guide
53-0000080-03
Hardware features
1
•
Port 2/2 (optional 10-GbE uplink port)
•
Port 2/3 (optional 10-GbE uplink port)
•
Port 2/4 (optional 10-GbE uplink port)
Brocade NetIron CES 2048 and Brocade NetIron CER 2048 devices with 48 ports:
•
Ports 1/1 –1/24
•
Ports 1/25 – 1/48
•
Port 2/1 (10-GbE uplink port on Brocade NetIron CES 2048CX, Brocade NetIron CES 2048FX,
Brocade NetIron CER 2048CX, and Brocade NetIron CER 2048FX models only)
•
Port 2/2 (10-GbE uplink port on Brocade NetIron CES 2048CX, Brocade NetIron CES 2048FX,
Brocade NetIron CER 2048CX, and Brocade NetIron CER 2048FX models only)
Network interfaces
The output of the show media command displays the type of media installed in the ports.
Brocade# show media
Port 1/1:
Type : Copper
Vendor: Unknown, Version: Unknown
Part# : Unknown, Serial#: Unknown
Port 1/2:
Type : Copper
Vendor: Unknown, Version: Unknown
Part# : Unknown, Serial#: Unknown
Port 1/24:
Type : Copper
Vendor: , Version: Unknown
Part# : Unknown, Serial#: Unknown
Port 2/1:
Type :
10GBASE-SR/SW (XFP)
Vendor: FOUNDRY NETWORKS, Version: 00
Part# : FTLX8511D3-F1 , Serial#: KCP02X8
Port 2/2:
Type :
10GBASE-SR/SW (XFP)
Vendor: FOUNDRY NETWORKS, Version: 02
Part# : TRF2000EN-LF251 , Serial#: T07J23170
All show media done
Syntax: show media
Power supplies
Each device comes with one alternating-current (AC) or one direct-current (DC) power supply. All
models have two power supply slots, enabling you to install a second power supply for redundancy.
NOTE
Changes or modifications made to this device that are not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
The power supplies can be swapped in or out of the device while the device is running. You can
remove and insert a power supply without opening the chassis. The remaining supply provides
enough power for the entire system.