Brocade NetIron CES and Brocade NetIron CER Hardware Guide
33
53-0000080-03
Redundant power supply installation
3
Redundant power supply installation
The Brocade device ships with one alternating-current (AC) power supply or direct-current (DC)
power supply. All models have two power supply slots, enabling you to install a second power supply
for redundancy. If desired, you can install a second supply for redundancy.
CAUTION
Changes or modifications made to this device that are not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
If you need to install a redundant power supply, it may be easier to install it before mounting the
device, although the power supplies are “hot swappable” and can be installed or removed after the
device is mounted and powered on.
This section provides the following procedures:
•
Installing a redundant AC power supply –
“Installing an AC power supply”
on page 33
•
Installing a redundant DC power supply –
“Installing a DC power supply”
on page 35
Installing an AC power supply
DANGER
Before beginning the installation, refer to the precautions in
“Power precautions”
on page 30.
Use the following procedures for AC power supplies in Brocade NetIron CES, Brocade NetIron CER
2000 series devices.
Summary of Contents for NetIron CER 2024C
Page 12: ...xii Brocade NetIron CES and Brocade NetIron CER Hardware Guide 53 0000080 03 In this chapter...
Page 90: ...78 Brocade NetIron CES and Brocade NetIron CER Hardware Guide 53 0000080 03 China A China...
Page 100: ...88 Brocade NetIron CES and Brocade NetIron CER Hardware Guide 53 0000080 03 Danger B...
