4 of 12
Brocade Host Bus Adapter Quick Installation Guide
Publication Number: 53-1000883-03
a. Pull out the protective rubber plug from the
SFP connector.
b. Using your thumb and forefinger, unlatch the
bail from the side of the fiber optic cable
connector and pull it straight out. Arrows
stamped on the bail mark the location where
you unlatch it.
2. The Brocade HBA ships with a low-profile
mounting bracket installed. If the installed bracket
works as is, go on to
step 3
.
If your system chassis requires the longer standard bracket to secure the
HBA in the slot, perform the following steps to replace the bracket:
a. Remove the two screws attaching the bracket to the HBA card, and
pull off the bracket.
b. Carefully guide the new mounting bracket onto
the HBA card, making sure the bracket
mounting tabs align with the holes in the HBA
card.
c. Replace and tighten the two screws.
d. Store the mounting bracket that you removed
for future use.
.
PORT
0
1
