Brobo Group
brobo.com.au
3.1.3. Hydrocheck
Unit
The hydrocheck unit (
Figure 10
) is precision built self contained hydraulic
control unit designed to smooth out pneumatic cylinder movement for cold
cutting: The piston speed is controlled on the stroking stroke by pushing oil
from one side of the piston to the other via a transfer tube and needle valve
which adjusts checking rate.
3.1.4. Pneumatic Vice Clamp
Operating at 600kPa, the vice clamps (
Figure 11
)
firmly secure the workpiece in preparation for cutting.
The pressure of each vice clamp could be modified
using the pressure regulators located on the main
electrical unit door. Each vice must be adjusted
manually to accommodate various cross-sectional
profiles.
Figure 10. Hydrocheck unit
Figure 11. Pneumatic Vice Clamp
