Brobo Group
brobo.com.au
CHAPTER 1 - Installation of the Machine
1.1. Unpacking & Handling the Machine
Upon receiving the
Brobo Group
SA350/SA400 Semi-Automatic Saw
, the machine should be standing upright &
positioned centrally on top of a wooden pallet. While the machine is situated on the pallet, position the forklift arms
under the pallet between the runners, keeping in mind that the machine is
head heavy
. Move the entire unit to an
accessible area as close as possible to the final location.
Carefully remove the wooden frame surrounding the saw unit (Figure 1). Once completed, proceed by elevating the
machine away from the pallet base using a sling harness wrapped around the cutting head of the saw. Ensure that
the floor is as level as possible before finally positioning the machine to the desired location.
FIGURE 1
.
Handling of Semi-Automatic Cutting Saw Unit
PLEASE OBSERVE & FOLLOW THE INSTALLATION INSTRUCTIONS ON PAGE 7
WARNING – HEAD HEAVY MACHINES
The metal sawing machines are heaviest where the saw heads are fitted & as such, care must
be taken while relocating or moving the machines.