Brobo FA 3000K, Product And Maintenance Manual

Page: 8 / 42

3. MAIN FUNCTIONS AND OPERATION
Upon placing the machine in position, connect the power cable as per Section 5 electrical schematics and plug it
into the power socket (note the machine can only run on 5-wire 440V 3-phase power, not on 4-wire). Connect the
machine to the air-compressor system at the main air supply connections (Figure 3.1).
Machine is now ready to be turned on.
Figure 3.1 – Main Air-Supply Connections
Figure 3.2 illustrates FA 3000K control panel and the external control buttons. Machine operation is controlled
two-fold by external push buttons shown in the Figure 3.2 (Emergency Stop, Start button, Reset button and the
Main Power switch), and the touch-screen buttons which are displayed electronically on the Control Panel.
Figure 3.2 – Main Control Screen
COMPRESSED
AIR SUPPLY
3-PHASE POWER
SUPPLY CABLE
Machine Status
Panel and Re-
Calibrate Button
Initial Cut Length
(Not Applicable)
Start Auto
Cutting
Pause Auto
Cutting (Feeder
Operation Only)
Stop Auto
Cutting (Feeder
and Saw)
Parts Cut List:
Part Name,
Length, Qty
Requested
Cuts
Counter
Calculated
Total Stock
Length
Required for
the Cut List
Entered
Go To Job
List Screen
Go To
Length Stop
Screen
20 August 2016 Main Functions and Operation 5