background image

page 7

GROUNDING INSTRUCTIONS

WIRING

Grounding Instructions – This appliance must be grounded. If it should malfunction or break down, grounding provides a path of
least resistance for electric current, to reduce the risk of electric shock. This appliance is equipped with a cord having an 
equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinances.

This appliance is for use on a standard 120 VAC, dedicated 15-amp branch circuit with a NEMA 5-15R receptacle or a dedicated
20-amp branch circuit with a NEMA 5-20R receptacle for Broan models VX3000C and VX6000C. For Broan model VX12000C, a
dedicated nominal 240 VAC, individual 20-amp branch circuit with NEMA 6-20R receptacle is required. Make sure that the 
appliance is connected to an outlet and has a grounding attachment plug that looks like the plug shown in either 

Fig. 4

or 

Fig. 5

depending on the model. No adapter should be used with this appliance.

TO

OTHER
INLETS

NOTE: 

INLET LEADS TO BE CONNECTED TO POWER UNIT

             TERMINALS USING CRIMP CONNECTORS
             AND LOW VOLTAGE WIRE HARNESS.

INLET
LEADS

MODEL V133 18/2 WIRE

POWER

UNIT

POWER
CORD

NORTH AMERICA

AC ELECTRIC

OUTLET

GROUND PIN

NEMA 6-20R

240 VOLT GROUNDED
OUTLET BOX

AE0010A

CRIMP CONNECTORS

LOW VOLTAGE WIRE

LOW VOLTAGE

WIRE HARNESS

Broan VX12000C

TO

OTHER
INLETS

NOTE: 

INLET LEADS TO BE CONNECTED TO POWER UNIT

              TERMINALS USING CRIMP CONNECTORS
              AND LOW VOLTAGE WIRE HARNESS.

INLET
LEADS

MODEL V133 18/2 WIRE

POWER

UNIT

POWER
CORD

NORTH AMERICA

AC ELECTRIC

OUTLET

120 VOLT GROUNDED
OUTLET BOX

NEMA 5-15R

OR

NEMA 5-20R

GROUND PIN

CRIMP CONNECTORS

LOW VOLTAGE WIRE

LOW VOLTAGE

WIRE HARNESS

AE0029A

Broan VX3000C & VX6000C

F

IG

. 4

F

IG

. 5

WARNING

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with
a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do
not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by
a qualified electrician.

!

Summary of Contents for VX12000C

















Reviews: