Page 2
MODEL P12D
AEWPD SERIES
SOFFIT CHIMNEY
(Required only for
soffit-less
installations)
OUTDOOR
SERIES
HOOD
(Canopy with
blower controls
& lighting.
Required for all
installations.)
(WPD28
1
shown)
MODEL P12D
BLOWER
(Interior Blower)
ABWPD SERIES
BACKSPLASH
(Stainless Steel wall
covering with shelves.
Optional)
MODEL 410
(10” Rd. Duct - 2 ft. sections)
MODEL 418
(10” Rd.
Adjustable Elbow)
MODEL 441
(10” Rd. Wall Cap)
MODEL 421
(10” Rd. Vertical
In-Line Damper)
MODEL 437
(High Capacity
Roof Cap)
TRANSITION
SV03428
(supplied with hood)
VERTICAL DISCHARGE
BARREL NUT
BLOWER
POWER
CORD
1. Assemble barrel nut (packed loose with blower) approxi-
mately 1/2 way onto threaded stud on top inside of hood.
2. Lift blower to top inside of hood as shown. Slide blower
back to engage blower tab with slot in hood top and slot in
blower with barrel nut.
3. Tighten barrel nut to secure blower to hood. Use a long, flat-
blade screwdriver.
4. Plug blower power cord into receptacle inside of hood.
BLOWER INSTALLATION
Installation into Best by Broan Outdoor
Range Hoods.
SLOT
BEST BY BROAN OUTDOOR
RANGE HOOD SYSTEM
THREADED
STUD
BOTTOM
INSIDE VIEW
OF HOOD
BLOWER TAB
