background image

6

 

Key No. 

Part No. 

Description

 1 

99111432 

Grille

 2 

99360253 

Knob

  3 

52872039 

Grille Screw

  4 

97018465 

Heater Assembly (9810WH)

 

 

97018466 

Heater Assembly (9815WH)

  5 

57271000 

Thermostat, with Mounting Nut

  6 

33384000 

Thermostat Cover

  7 

33178000 

Blower & Motor

  8 

 98010878 

Heat Box

  9 

35841000 

Thermal Fuse

  10 

99271433 

Thermal Protector

SERVICE PARTS

1

2

3

4

5

6

7

8

9

10

BROAN-NUTONE ONE YEAR LIMITED WARRANTY

Broan-NuTone warrants to the original consumer purchaser of its 

products that such products will be free from defects in materials 

or workmanship for a period of one year from the date of original 

purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS 

OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED 

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE.
During this one-year period, Broan-NuTone will, at its option, re-

pair or replace, without charge, any product or part which is found 

to be defective under normal use and service.
THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT 

LAMP STARTERS, TUBES, HALOGEN AND INCANDESCENT 

BULBS, FUSES, FILTERS, DUCTS, ROOF CAPS, WALL CAPS 

AND OTHER ACCESSORIES FOR DUCTING. This warranty 

does not cover (a) normal maintenance and service or (b) any 

products or parts which have been subject to misuse, negligence, 

accident, improper maintenance or repair (other than by Broan-

NuTone), faulty installation or installation contrary to recommend-

ed installation instructions.
The duration of any implied warranty is limited to the one-year pe-

riod as specified for the express warranty. Some states do not al-

low limitation on how long an implied warranty lasts, so the above 

limitation may not apply to you.
BROAN-NUTONE’S OBLIGATION TO REPAIR OR REPLACE, 

AT BROAN-NUTONE’S OPTION, SHALL BE THE PURCHAS-

ER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WAR-

RANTY. BROAN-NUTONE SHALL NOT BE LIABLE FOR INCI-

DENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING 

OUT OF OR IN CONNECTION WITH PRODUCT USE OR PER-

FORMANCE. Some states do not allow the exclusion or limitation 

of incidental or consequential damages, so the above limitation or 

exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also 

have other rights, which vary from state to state. This warranty 

supersedes all prior warranties.
To qualify for warranty service, you must (a) notify Broan-NuTone 

at the address or telephone number below, (b) give the model 

number and part identification and (c) describe the nature of any 

defect in the product or part. At the time of requesting warranty 

service, you must present evidence of the original purchase date.

Broan-NuTone LLC 

926 W. State Street 

Hartford, Wisconsin 53027 

www.broan.com    800-558-1711 

WARRANTY

99045152B

Summary of Contents for 9810WH Series













Reviews: