Broadcom Brocade G630, Hardware Installation Manual

Page: 90 / 106

Other
System component Description
Serial console port One three-wire (Tx, Rx, Gnd) UART serial port
Ethernet management port One 1000/100/10 Mbps Ethernet port
USB port One external USB port
LEDs
System component Description
System power LED One green system power status LED (lower) on the port side.
System status LED One bicolor (green/amber) system status LED (upper) on the port side.
Ethernet port link LED One link LED to the left of the RJ45 connector on the port side. Glows green for 1000 Mbps and amber for
100/10 Mbps.
Ethernet port activity LED One activity LED to the right of the RJ45 connector on the port side.
Serial console port LED The serial console port LEDs on the port side remain off at all times, even when a cable is inserted and the link is
active.
FC port status LED 128 bicolor (green/amber) port status LEDs. One for each SFP+ port and four for each QSFP port on the port
side of the switch.
Power supply status LEDs One green OK status LED on each power supply assembly on the nonport-side of the switch.
One amber FAIL status LED on each power supply assembly on the nonport-side of the switch.
Fan assembly status LED One bicolor fan assembly status LED on each fan assembly on the nonport-side of the switch.
Other
System component Description
Serial cable RJ-45 console cable
RJ-45 to DB9 adapter RJ-45 to DB9 for console cable
RJ-45 connector Uses an RJ-45 connector for the serial port
Weight and physical dimensions
Empty weight refers to the device with two power supply and fan assemblies installed but no SFP+ or QSFP transceivers.
Model Height Width Depth Weight (empty) Weight (fully loaded)
Brocade G630 switch 8.67 cm
3.41 inches
44.00 cm
17.32 inches
60.96 cm
24.00 inches
19.05 kg
42.00 lbs
(With 2 PSUs and 3
Fans)
21.31 kg
47.00 lb
(With all the
transceivers)
Other
Brocade G630 Hardware Installation Guide
90 53-1005235-02