Broadcom Brocade G630 Page 54 Hardware Installation Manual Download | Manualshive

Page: 54 / 106

background image

Setting the domain ID

Perform the following steps to set the switch domain ID.

1. Log in to the switch through Telnet using the admin account.
2. Modify the domain ID if required.

The default domain ID is 1. If the switch is not powered on until after it is connected to the fabric and the default domain ID is
already in use, the domain ID for the new switch is automatically reset to a unique value. If the switch is connected to the fabric
after it has been powered on and the default domain ID is already in use, the fabric segments. To find the domain IDs that are
currently in use, enter the

fabricShow

command on another switch in the fabric.

Perform the following steps to modify the domain ID.
a)

Disable the switch by entering the

switchDisable

command.

b) Enter the

configure

command. The command prompts display sequentially; enter a new value or press

Enter

to accept

each default value.

c)

Enter

y

after the "Fabric param" prompt.

Fabric param (yes, y, no, n): [no] y

d) Enter a unique domain ID (such as the domain ID used by the previous switch, if still available).

Domain: (1..239) [1] 3

e)

Complete the remaining prompts or press

Ctrl+D

to accept the remaining settings without completing all the prompts.

f)

Re-enable the switch by entering the

switchEnable

command.

Verifying correct operation

Perform the following steps to verify correct operation of the device.

1. Check the LEDs to verify that all components are functional.

Setting the domain ID

Brocade G630 Hardware Installation Guide

54

53-1005235-02

«
...
52
53
54
55
56
...
»

Summary of Contents for Brocade G630











































































































Reviews:

No comments

Related manuals for Brocade G630

Brand: Adler Pages: 8

PowerSwitch Z9332F-ON

Brand: Dell EMC Pages: 16

Brand: Zamel Pages: 2

Brand: Homefibre Pages: 2

Brand: Stahl Pages: 29

Brand: Origin Instruments Pages: 6

Brand: SLV Pages: 22

Brand: Kramer Pages: 35

Brand: Kramer Pages: 2

Palert PX-01 Series

Brand: JenLogix Pages: 48

Plug in Digital Time Switch

Brand: Grasslin Pages: 88

Brand: Linksys Pages: 2

Brand: Lantech Pages: 80

FS5300-EI Series

Brand: H3C Pages: 57

Brand: Dwyer Instruments Pages: 4

Brand: NETGEAR Pages: 2

Champion KD-4X4XC

Brand: Key Digital Pages: 8

Brand: SMART-AVI Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands