background image

e-mail: 

[email protected]   

voice: 

360.854.9559   

fax: 

866.783.1742

12

SS 4.1 MLR/RJ Installation and Operation Manual

OPERATION

Menu Operation

Broadcast Tools(R) SS 4.1 MLR, v1.15 - Setup Menu

1 - Set PIP Minimum Hold Time(0 - 2.55 sec) 

- Now:0.05

2 - Set Silence Sense Acquire Delay (sec)   

- Now:  10

3 - Set Silence Sense Restore Delay (sec)   

- Now:   2

4 - Set Silence Sense Threshold             

- Now:OFF

5 - Set Stepping Interval (sec 1-99)        

- Now:  10

6 - Set Last Step Channel                   

- Now:   4

7 - Lock/Unlock Front Panel                 

- Now:UNLOCKED

8 - Set EAS Controlled Input                

- Now: Off

S - Turn ON audio input
M - Turn OFF audio

V - Save Audio State for Power Up
C - Show Configuration and Status
F - Set Factory Defaults

Audio Status:Present - Channel 1

Enter Selection, or Q to quit:

To enter menu mode send the command: *0MM 
To select a menu function, simply enter the letter on the left side of the menu and
wait for the prompt.  Example: Type the letter “S” Response:  Enter Input Channel:
Entering a 1 would select input channel one.

WEBSITE:

Visit our web site for
product updates and
additional information.

Summary of Contents for SS 4.1 MLR




















Reviews: