e-mail:
voice:
360.854.9559
fax:
866.783.1742
3
I/O Sentinel
®
4 Installation and Operation Manual
INTRODUCTION
INTRODUCTION
Thank you for your purchase of a Broadcast Tools® I/O Sentinel® 4 Web enabled
four status/logic inputs, four relay output module (referred to as the I/O Sentinel® 4
throughout this manual). We’re confident that this product will give you many years
of dependable service. This manual is intended to give you all the information need-
ed to install and operate the Broadcast Tools® I/O Sentinel® 4.
SAFETY INFORMATION
Broadcast Tools, Inc., is unable to support NON-Broadcast Tools® hardware/soft-
ware or NON-Broadcast Tools® computer hardware/software problems. If you
experience these problems, please research your hardware/software instruction man-
uals or contact the manufacturer’s technical support department.
WHO TO CONTACT FOR HELP
If you have any questions regarding your product or you need assistance, please con-
tact your distributor from whom you purchased this equipment.
If you would like more information about Broadcast Tools® products, you may
reach us at:
Broadcast Tools, Inc.
131 State Street
Sedro-Woolley, WA 98284-1540 USA
Voice: 360.854.9559
Fax:
866.783.1742
Internet Home Page: www.broadcasttools.com
E-mail:
THANK YOU FOR CHOOSING
BROADCAST TOOLS® BRAND PRODUCTS!
CAUTION!
Only qualified technical
personnel should install
the I/O Sentinel® 4.
Any attempt to install
this device by a person
who is not technically
qualified could result in
a hazardous condition
to the installer or other
personnel or damage to
the I/O Sentinel® 4 or
other equipment.
Please ensure that prop-
er safety precautions
have been taken before
installing this device. If
you are unfamiliar with
this type of equipment,
please contact a proper-
ly qualified engineer to
handle the installation
and setup of the I/O
Sentinel® 4.
Broadcast Tools®
Products, as with any
electronic device, can
fail without warning.
Do not use this product
in applications where a
life threatening condi-
tion could result due to
failure.
NOTE:
This manual should be
read thoroughly before
installation and operation.
Broadcast Tools is a Veteran Owned Business
Designed, Assembled and Supported in WA State, USA
