e-mail:
voice:
360.854.9559
fax:
866.783.1742
16
I/O Sentinel
®
4 Installation and Operation Manual
SETUP
“Relay Setup” Web Page
Relays 1 - 4
I/O device selection: Allows the user to select the I/O setup configuration pages.
Relay label:
Used to identify the device.
Alarms OFF:
This option enables email alarms with an “OFF” relay.
Email Addresses:
The “OFF” boxes labeled 1 thru 8 allow the user to enable up
to eight different email addresses for off alarms.
Alarms ON:
This option enables email alarms with an “ON” relay.
Email Addresses:
The “ON” boxes labeled 1 thru 8 allow the user to enable up
to eight different email addresses for on alarms.
Log Device:
This enables the email logging of the relay status.
Scheduler:
When enabled, the user may set each relay alarm to be dis-
abled or enabled by configuring the required day(s) of week
and the start and end hours and minutes.
Enable Extension:
Normally not checked. This box should be checked when
paired with a second I/O Sentinel® 4 to form a “4 Channel
Bi-directional Status/Relay Extension Cord”.
WEBSITE:
Visit our web site for
product updates and
additional information.
NOTE:
After any item has been
changed, you MUST
press the “Save
Settings” button for
your changes to be
saved.
