e-mail:
voice:
360.854.9559
fax:
866.783.1742
3
Audio Sentinel Installation and Operation Manual
INTRODUCTION
INTRODUCTION
Thank you for your purchase of a Broadcast Tools® Audio Sentinel™ Web based
dual channel stereo silence monitor (referred to as the Audio Sentinel™ throughout
this manual). We’re confident that this product will give you many years of depend-
able service. This manual is intended to give you all the information needed to install
and operate the Broadcast Tools® Audio Sentinel™.
SAFETY INFORMATION
Only qualified technical personnel should install the Audio Sentinel™. Any attempt
to install this device by a person who is not technically qualified could result in a
hazardous condition to the installer or other personnel or damage to the Audio
Sentinel™ or other equipment. Please ensure that proper safety precautions have
been taken before installing this device. If you are unfamiliar with this type of
equipment, please contact a properly qualified engineer to handle the installation
and setup of the Audio Sentinel™.
WHO TO CONTACT FOR HELP
If you have any questions regarding your product or you need assistance, please con-
tact your distributor from whom you purchased this equipment.
If you would like more information about Broadcast Tools® products, you may
reach us at:
Broadcast Tools, Inc.
131 State Street
Sedro-Woolley, WA 98284-1540 USA
Voice: 360.854.9559
Fax:
866.783.1742
Internet Home Page: www.broadcasttools.com
E-mail:
THANK YOU FOR CHOOSING
BROADCAST TOOLS® BRAND PRODUCTS!
CAUTION!
Broadcast Tools®
Products, as with any
electronic device, can
fail without warning.
Do not use this product
in applications where a
life threatening condition
could result due to failure.
NOTE:
This manual should be
read thoroughly before
installation and operation.
WEBSITE:
Visit our web site for
product updates and
additional information.
