e-mail:
voice:
360.854.9559
fax:
866.783.1742
18
Audio Sentinel Installation and Operation Manual
OPERATION
Save Settings:
After pressing the “Save Settings” button, the device
will reboot (If you changed the IP address, you must
navigate your web browser to the new IP address (if the
HTTP port was changed from port 80, be sure to add the
new port number after the IP: xxx.xxx.xxx.xxx:port #).
If you didn’t change the IP address, then the web page
will return to the login screen after the device reboots.
Reboot Device:
When you press the “Reboot Device” button, the device
resets, you must navigate your web browser to the new
IP address.
Send Test Email:
Press this button to send a test email. When the email has
completed an alert box will pop-up indicating the status
of the email and an error condition if the email was not
sent correctly. If an email was not sent correctly please
review your SMTP settings and correct as necessary.
NOTE: After you are done making changes to the Email/Network Setup page,
you MUST press the “Save Settings” button to save your changes.
Reload Defaults:
When you press the “Reload Defaults” button, the
device resets, you must navigate your web browser to
the new IP address (if the HTTP port was changed from
port 80, be sure to add the new port number after the IP:
xxx.xxx.xxx.xxx:port #).
Clear Daily Logs:
When you press the “Clear Daily Logs” button the daily
logs stored in memory will be cleared. Keep in mind
that if the Alarms Cleared Event is enabled this event
will post after the logs are cleared.
Send Daily Logs:
When you press the “Send Daily Logs” button the sys-
tem will send the daily logs email and then clear those
logs as if the correct time has expired.
