e-mail:
voice:
360.854.9559
fax:
866.783.1742
19
Audio Sentinel Installation and Operation Manual
OPERATION
“Show Log” Web Page
This page displays current alarms.
Active Channel:
Displays which channel is active.
Input (Channel) 1 Level: Displays if channel ONE has a valid level as configured.
Input (Channel) 2 Level: Displays if channel TWO has a valid level as configured.
Auto/Manual:
Displays what switching mode is active.
Switch Bounce:
Displays if switch bounce is ON or OFF.
Date:
Displays what date the alarm was logged.
Time:
Displays what time the alarm was logged.
With the “admin” access level, the user may control all functions.
With the “Monitor/Control” and “Monitor” only access level, the user may view the
“Show Log”, enable/disable PC speaker sound and silence alarms.
NOTE: Shock Wave “Flash” must be installed and operating properly on your
PC for the “Alarm Sound” to work when enabled.
