41
©2020 Broadcast Electronics
Front Panel Features & Controls
The front assembly provides the transmitter control center and contains LED indicators for the system
controller, internal exciter, internal power amplifier, and an LCD user interface. The reference designators
in the figures below refer to sub-section numbers in this section. For example, Box 5.1 of Figure 8
corresponds to details in 5.1 of this section
Figure 8 – Control and Feature Locations - FRONT
AUDIO
The audio LED indicates the status of the current primary audio source and remains green until a
fault is detected. If an audio peak is detected, this LED turns red and also during a silence
condition when no secondary audio is setup. If a secondary audio source is setup, the LED will
turn orange after the primary silence timeout. The LED will return to green when the fault is
cleared and the exciter switches back to primary. Check the exciter diagnostics for details on
what alarms or faults may be active.
5.1
5.2
5.3
5.7
5.6
5.4
5.5
5.8