23
©2020 Broadcast Electronics
6.
The display will show the current peak modulation attributable to the Composite input.
The level can be adjusted by changing the associated gain/attenuation. This has a range
of -96.0 dB to +22.0 dB in 0.25 dB steps. Press left or right to move the cursor. Press up
or down on each digit to increment or decrement the number. This has immediate
effect. Do this until the displayed peak hold is the desired value – typically 100%.
7.
8.
Note: The Composite input is summed with the supplementary sources SCA1, SCA2, and
RDS. When calibrating the Composite input, the supplementary sources should be
turned off
9.
COM P-> + 08.00dB
TRANSM ITTER CONTROL CENTER
100.7% ^
10.
Press enter when finished editing to save the L calibration setting.
Turn RF Transmission On
If all setup steps have been completed, including desired optional features in the next section,
the system should be ready for operation.
1.
At the main screen on the transmitter control center, press the return button.
< TX OFF >
TRANSM ITTER CONTROL CENTER
0W RFL= 0
2.
Press the button under “ON” to power up the transmitter.
TX OFF 0W
TRANSM ITTER CONTROL CENTER
ON OFF
