30
©2020 Broadcast Electronics
Stereo Generation and Stereo Pilot Injection
Internal stereo generation utilizing the AES or Analog L/R audio input channels is optional.
1.
From the main screen on the transmitter control center on the front panel of the main
assembly, press up or down to navigate to the MONO/ST MODE menu. Press enter to
continue.
< M ONO/ST M ODE>
TRANSM ITTER CONTROL CENTER
M ONO L+ R
2.
Press up or down to select STEREO.
M ODE-> STEREO
TRANSM ITTER CONTROL CENTER
^
3.
Press enter for the selected mono/stereo mode to save and take effect in the system.
4.
Note that if changing from any mono mode to stereo, the internally generated 19 kHz stereo
pilot will automatically turn on at the previously set level. Change back to mono from stereo
automatically turns the stereo pilot off.
5.
To change the injection of the 19kHz stereo pilot: from the main screen on the transmitter
control center on the front panel of the main assembly, press up or down to navigate to the
PILOT menu. Press enter to continue.
< PILOT >
TRANSM ITTER CONTROL CENTER
ON 10.0%
6.
Press up or down to select LEVEL.
PILOT
TRANSM ITTER CONTROL CENTER
LEVEL = 10.0%
