LinkBridge™ 18G/4K HDMI Matrix Switcher with Control Processor (LBS-88H2Q)
15
WEB SERVER DESCRIPTION
Connection Type:
Select Persistent or Action.
Telnet ID:
Select Telnet-1, 2 (Persistent type); Telnet-3, 4, 5, 6, 7, 8, 9, 10 (Action
type)
Telnet Connection Label:
Enter a label for the telnet connection.
Connection Status:
This box shows the status of a persistent connection.
TELNET OPTIONS
IP Address:
Enter IP address of telnet server.
IP Port:
Enter port number of telnet server. The default port number is 23.
UserName Prompt:
Enter username prompt from telnet server. Leave blank if there is no
username
prompt.
UserName:
Enter user name required for log in. Leave blank if there is no user
name.
Password Prompt:
Enter password prompt from telnet server. Leave blank if there is no
password
prompt.
Password:
Enter password required for log in. Leave blank if there is no password.
Command Prompt:
Enter command prompt from telnet server. Only the last 9 characters of
the command prompt are needed. Leave blank if there is no command
prompt.
Note: Select check box below if string is used as a one-time only
greeting.
Auto Trigger:
Select Telnet Trigger 1 or Telnet Trigger 2. This selection associates
the telnet connection with Telnet Trigger 1 or Telnet Trigger 2 used in
Auto
Actions.
End of line Pattern:
Select the end of line termination pattern
Tx Spacing:
Enter the delay (seconds) before command is transmitted in Telnet
Actions. Enter 0 if no delay is desired.
Draft
