4
LinkBridge™ 18G/4K HDMI Matrix Switcher with Control Processor (LBS-88H2Q)
OPERATION CONTROL AND FUNCTIONS
LAN:
Connect to an active network for Telnet and WEBGUI control
RS-232:
Connect to a device with an RS-232 interface for control using RS-
232 commands.
Relay:
Connect to a device for relay control. N/O is normally open
and N/C is normally closed with respect to COM.
GPIO:
Connect to the relay contact of an external device such as an
occupancy sensor.
+24V Power:
Pr24VDC to an external device such as an occupancy
sensor
5V USB Power:
USB 1-8 port provides 5V/0.5A Power
Note: If a USB device requiring more than 0.5A is connected,
the port will automatically shut off to prevent an overload and
the red LED will turn on.
12V Power
Connect terminal block to external 12V power input.
Audio In/Out:
Connect Audio IN 1 and IN 2 to an audio output device and Audio
OUT to an audio device such as an amplifier or an amplified speaker
HDMI INPUTS:
Connect to HDMI output devices such as PC/laptops or other
source devices.
HDMI OUTPUTS:
Connect to HDMI monitors.
FACTORY DEFAULT:
Press the button behind the hole to rest unit to factory defaults.
24V Power:
Plug in the supplied 24V/6.75A power supply adapter into the unit.
1
2
3
4
5
6
1
6
7
43
42
4
9
7
8
8
5
9
Draft
