LinkBridge™ 18G/4K HDMI Matrix Switcher with Control Processor (LBS-88H2Q)
13
WEB SERVER DESCRIPTION
CONFIGURE AUTOMATED CONTROL
The Configure Automated Control page is used to configure a set of automated
actions based on a selected trigger. Available triggers are RS-232 Channel 1, RS-232
Channel 2, Telnet Trigger 1 and Telnet Trigger 2. The available actions are RS-232,
Telnet, Audio Control and Video Control. All auto triggers work independently and
can be triggered simultaneously.
On the menu bar click Configure and then click Automated Control. The following
page will be displayed.
Trigger:
Select the auto action trigger. Available triggers are RS-232 Channel 1, RS-
232 Channel 2, Telnet Trigger 1 and Telnet Trigger 2.
Trigger When:
RS-232 triggers, enter the trigger string. Up to 2 trigger strings can
be defined for each RS-232 channel. For Telnet triggers, select the telnet trigger and
enter the trigger string. Up to 2 trigger strings can be defined for each Telnet trigger.
Note: A telnet trigger needs to be associated with one or more telnet actions. The
check box under the Commands box in Configure Key Action, Telnet Options panel
must be selected.
Action Number:
Select the action number to be defined. Up to 10 actions can be
triggered.
Spacing
: Specify the desired delay before the specified action is executed. Enter 0.0
for no delay.
Action Type:
Refer to the Configure Action Definitions sections for the action type
descriptions.
Draft
