67
Connecting the Gas Cylinder
IMPORTANT:
Before connecting and disconnecting the barbecue to a gas
cylinder make sure both of the grill control knobs are in the OFF position.
CAUTION:
When the barbecue is not in use, the gas must be turned off at the
gas cylinder valve.
Connecting:
Make sure cylinder valve is closed.
Check cylinder valve features to ensure it has proper mating threads to
those of the regulator. Read the instructions supplied with the regulator
to make sure of the correct connection and operation
Make sure the grill burner control knobs are in the
“
OFF
”
position.
Inspect cylinder valve connections port and regulator assembly. Look
for any damage or debris. Remove any debris. Inspect hose for
damage. Never attempt to use damaged or blocked equipment.
Connect the regulator assembly to the cylinder valve.
Open the cylinder valve fully. Use a soapy water solution to check all
connections for leaks before attempting to light barbecue. If a leak is
found, turn the cylinder valve off and do not use the grill
until repairs
can be made by your local gas dealer.
Disconnecting
Make sure both burner control valves are in the
“
OFF
”
position.
Make sure gas cylinder valve is fully closed.
Detach the regulator assembly from gas cylinder valve.
WARNING:
Never connect an unregulated gas cylinder to your
barbecue.
68
Lighting Procedure
Ignition System Check
The ignition test is done with the
gas cylinder valve closed.
Test both burners in turn by
following the procedure detailed
below
Make sure the control knob is in
the off position. Push in and turn
the control knob anti-clockwise to the High position until the control
clicks.
3. Repeat this operation, each time checking for a spark at the burner.
If spark is not evident at the burner, check that the ignition lead is firmly
attached to the control and spark electrode. With sparking established
turn the Control Knob to the OFF position.
Note:
If the igniter is faulty the burners can be lit using a lighted match attached
to the match holder.
Burner Operation
Open the lid before attempting to light the burners.
The User should always operate the grill with the Drip Tray in place.
Make sure both the control knobs are in the Off
“
0
”
position.
Open the gas cylinder valve.
To light the burners Push and in and turn the appropriate control knob
anti-clockwise to the High position, at the same time check that the
burner has lit. See note below. The left hand control knob controls the
Summary of Contents for 8713016082961
