Introduction
B115 06/16 Rev.2
ZIRKON D060 D – D140 D
4
Duplication in any type or form – even extracts – as well as the utilization
and/or communication of the contents hereof are not permitted without
written authorization by the company ‘briwatec GmbH‘ .
2.4 Spare
parts
The company ‚‘briwatec GmbH‘ recommends the use of original spare parts.
Original spare parts possess special quality properties and provide reliable
and safe functionality;
Development of the special use of the equipment
Manufacture in high quality and value
12-Months guarantee after installation or shipment (other than
worn-out components) or other agreed conditions.
NOTE!
The use of non-original spare parts can alter the properties of the equipment
and put its safety at risk!
The company ‘briwatec GmbH‘ is absolved of any liability for damage that
results there from.
DISPOSAL!
Worn-out components (indicated in the spare parts list) are waste products.
After exchange, the worn-out components should be disposed of in accordance
with the national regulations.
2.5
Service
For servicing queries, the company ‘briwatec GmbH‘ can be contacted as
follows:
briwatec GmbH
Tel. +49 (0) 7625 918 868-0
Schönauer Str. 62
Fax. +49 (0) 7625 918 868-33
79669 Zell i. W.
Germany
www.briwatec.de
For faster response to your queries, please have available the following data
and information:
Serial number
Which activity has already been undertaken?
Prior to service works on-site, the motor has to be disconnected from the
circuit by a qualified electrician so that an unforeseen start does not occur.
For servicing work, we recommend that the manufacturer or its local branch
or sub-contractor be engaged, especially where possible repairs under
warranty are involved.
The address of the servicing station appropriate for yourselves can be
obtained from the manufacturer (see the manufacturer’s address). Following
a repair or prior to re-start-up, the jobs indicated under “Installation“ and
“Start-up“ must be carried out as for the initial start-up procedure.
Service work:
