Maintenance
B115 06/16 Rev.2
ZIRKON D060 D – D140 D
18
9
Maintenance
DANGER!
Before undertaking maintenance works:
For maintenance activities, the machine must be secured by withdrawal of the
circuit plug or operation of the main switch to separate it from the E-Grid and
to ensure against re-switch-on.
Pressure-conducting conduits must be purged of air before disassembly!
Maintenance must not be carried out on operation-warm machinery (danger of
injury through contact with hot components)!
All machines have a permanent lubrication at the bearings. This must not be
re-lubricated.
For maintenance operations, the vanes and the filter cartridge of the inlet
filter must be checked, see chapter 9.1 and 9.2.
For maintenance of the filter and vanes the exhaust screen and casing lid
must be unscrewed.
For this purpose the fixing screws must be withdrawn and the screen and lid
removed.
9.1
Air Filter
NOTE!
If there is insufficient maintenance of the filter, the compressor has a reduced
functionality!
The filter cartridge for the suction air, depending on the degree of
contamination, should be cleaned by purging from inside to outside.
The operational readiness of the degree of separation will be reduced in
spite of cleaning the filter. Therefore, we recommend replacement of the
filter every half year.
Filter replacement:
Filter replacement is carried out in the following manner:
Unscrew the filter box cover figure 6, position 3
The filter cartridge is withdrawn, figure 6, position 1
The filter cartridge is cleaned and/or exchanged
The re-assembly is carried out in the reverse manner.
