Safety
B125 06/16 Rev.1
TOPAS E350V-E600V
9
WARNING!
Maintenance work in progress (read instructions!)
WARNING!
Parts or circuits under high pressure!
WARNING!
The unit is remote controlled and may start up without a warning
signal (ISO 7000-0017)!
3.5
Personnel requirements
WARNING!
Danger due to inadequate qualifications.
Improper operation may result in considerable personal injury and material
damage. Therefore:
All activities must only be carried out by qualified personnel.
Work on electrical equipment must be performed by a qualified electrician in
accordance with electrical regulations.
This relates to work on the electrical system for installation, commissioning, re-
pairs and maintenance.
The operation of the machine must only be performed by trained or skilled per-
sonnel. The operator must be familiar with the basic regulations on occupational
safety and accident prevention and must be familiar and trained in the operation
of the machine. . Before switching on the machine, the user must have read and
understood this manual.
3.6
Definition of terms
… have been informed by the operator in a briefing about the tasks and potential
hazards of improper conduct.
… are, through technical training, knowledge, experience and knowledge of the
relevant provisions, in a position to execute their assigned tasks and identify and
prevent potential hazards independently.
… pre-wired combination of pump and motor.
… drive motor of the pump.
… machine for generating an underpressure (vacuum).
Electrical equipment
Operation of the machine
Trained persons /
operators
Skilled personnel
Machine
Motor
Vacuum pump
