manualshive.com logo in svg

briwatec TOPAS E350 V, Translation Of The Original Instructions

Share
Download
briwatec TOPAS E350 V Translation Of The Original Instructions Download Page 28

Maintenance 

B125 06/16 Rev.1  

 

 

TOPAS E350V-E600V 

 

 

 

 

           28 

 

 

INFORMATION! 

The oil back-suction sucks the oil collected in the filter element back into the 
pump. 

 

 

Fig. 17  Float switch for oil back-suction

 

 

 

CAUTION! 

Risk of injury from spraying substances. 

Wear protective goggles when performing the functional check of the oil back-
suction. 

 

Functional check: 

 

Stop the pump, 

 

Remove the access plate of the filter elements, 

 

Pour ¼ liters of oil into the automatic oil separator 

→

 the float (3) must 

rise, 

 

Restart the pump. The filled-up oil must be suctioned; the oil level in the 
filter elements drops. If there is a clear leakage of oil after loosening the 
access plate, this means the nozzle (2) is blocked, 

 

Loosen the screw fitting (1) and rinse the nozzle (2). 

 

9.10

 

Oil level monitoring (optional) 

Optionally, a float switch or oil level switch can be fitted to trigger an alarm when 
the oil level drops. 
The monitor is mounted on the plate containing the oil level indicator and the oil 

drain valve. 
To prevent false alarms, it is recommended to delay the fault information (oil 
shock) by at least 5 seconds. 

Practical tip:

3

1

2

Summary of Contents for TOPAS E350 V

































Reviews:

No comments

Brands by name

Popular brands

Load more brands