Indicators on LCD
Transmission Indicator
Temperature / Timer display
Fan speed display
Silence Display
Sleep Display
Mode display
ON / OFF display
This transmission indicator illuminates when the
remote control transmits a signal to the indoor unit.
Displays the current operation mode. Including
auto(
), cool(
), dry(
), heat(
), fan(
)
and back to auto (
).
Displays the temperature setting (17 C ~ 30 C). When
O
O
you set the operating mode to FAN, no temperature
setting is displayed. If in the TIMER mode, it will
show the ON and OFF settings of the TIMER.
Displayed by pressing the ON / OFF button.
Press the ON / OFF button again to change.
Displays the selected fan speed, AUTO (no display)
and three fan speed levels " " (LOW) "
" (MED)
"
" (HIGH) can be indicated. The fan speed is AUTO
when the operating mode is either AUTO or DRY.
Displayed when SILENCE function is activated.
Displayed during SLEEP mode.
Press the SLEEP button again to exit SLEEP mode.
Note:
All indicators shown in the figure are for the purpose
of presentation. During the actual operation of the
remote control, only the relative functional signs are
shown in the display window.
Lock Display
Displayed when LOCK mode is activated.
FOLLOW ME Display
Displayed when FOLLOW ME function is activated.
auto cool dry
heat
fan
silence sleep follow me lock
run
SET TEMP. TIMER ONOFF
System operation
Cooling /Heating/Fan operation
Ensure the unit is plugged in and the power is
turned on.
1. Press the
button to select COOL,
MODE
HEAT or FAN mode.
2. Press the
buttons to set the
UP / DOWN
desired temperature. The temperature can
be set within a range of 17 C ~ 30 C in 1 C
O
O
O
increments.
3. Press the
button to select the fan speed
FAN
in four steps - Auto, Low, Med or High.
4. Press the
button to start the air
ON / OFF
conditioner.
In FAN mode, the temperature setting is not
displayed on the remote control; you are unable
to control the room temperature. In FAN mode,
only steps 1, 3 and 4 may be performed.
NOTE
Auto operation
Ensure the unit is plugged in and the power is
turned on. The OPERATION indicator on the
display panel of the indoor unit will start flashing.
1. Press the
button to select Auto.
MODE
2. Press the
button to set the
UP / DOWN
desired temperature. The temperature can
be set within a range of 17 C ~ 30 C in 1 C
O
O
O
increments.
3. Press the
button to start the air
ON / OFF
conditioner.
1. In Auto mode, the air conditioner will logically
choose Cooling, Fan, or Heating mode by
sensing the difference between the actual
ambient room temperature and the set point
temperature on the remote control.
2. In the Auto mode, you can not control the fan speed.
It is automatically controlled by the unit.
3. If the Auto mode is not comfortable for you, set the
desired mode manually.
NOTE
3
1
2
4
1
2
3
2
2
TURBO
SELF
CLEAN
SLEEP
FRESH
SILENCE
TIMER
ON
TIMER
OFF
LOCK
RESET
LED
FOLLOW
ME
FAN
SPEED
SWING
MODE
TEMP
ON/OFF
ON/OFF
SWING
TURBO
SELF
CLEAN
SLEEP
FRESH
SILENCE
TIMER
ON
TIMER
OFF
LOCK
RESET
LED
FOLLOW
ME
FAN
SPEED
SWING
MODE
TEMP
SWING
