Model
Rated Voltage
8m
3.0V (2 x AAA 1.5Volt Batteries)
Remote Control Specifications
1. Operating Mode: AUTO, COOL, DRY, HEAT and FAN.
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range: 17 C ~ 30 C
0
0
4. Full function LCD (Liquid Crystal Display).
Environment
Signal Receiving
Range
Performance Feature
RG36F/BG(C)EF, RG36F1/BG(C)EF
Model A:RG36F/BG(C)EF
-5 C ~ 60 C
0
0
NOTE:
utton design
be slightly different from the one
Remote control b
may
epending on
individual model.
supplied d
the
All the functions described are
.
associated with the relative indoor unit
If the indoor unit
feature, there is no
does not have a particular
performed by the indoor unit
corresponding operation
.
1
2
4
5
3
9
10
8
6
7
11
12
13
14
15
TURBO
SELF
CLEAN
SLEEP
FRESH
SILENCE
TIMER
ON
TIMER
OFF
LOCK
RESET
LED
FOLLOW
ME
FAN
SPEED
SWING
MODE
TEMP
ON/OFF
SWING
Function buttons
1
2
Each time the button is pressed, the operating
mode is cycled in the following sequence:
3
MODE Button
4
5
ON/OFF Button
Operation starts when this button is pressed
and stops when this button is pressed again.
AUTO
COOL
DRY
HEAT
FAN
NOTE:
If the unit is running in SLEEP mode, this
function will be cancelled if you press the MODE,
FAN SPEED or ON/OFF button.
6
Activate / Disable SLEEP function. If this button
is held for more than 2 seconds, the FRESH
function will be activated. Press and hold for
more than 2 seconds again to disable.
SLEEP / FRESH (optional) Button
SWING
Button
SWING
Button
Used to stop or start the horizontal louver
movement or set the desired up / down air flow
direction. The louver changes in 6 angle
0
increments with each press. If the button is held
for more than 2 seconds, the louver will swing
up and down automatically.
Activate / Disable TURBO function. Press and
hold for more than 2 seconds to activate the
SELF CLEAN function. Press and hold for more
than 2 seconds again to disable.
TURBO / SELF CLEAN Button:
Used to stop or start the vertical louver
movement or set the desired left / right air flow
direction. The louver changes 6 angle
0
increments with each press. And the temperature
display area of indoor unit displays
for one
second. If the button is held for more than
2 seconds, the louver will swing left and right
automatically, and the display area of indoor unit
will flash ‘III’ four times. The display will then revert
back to the temperature setting. If the vertical louver
swing feature is stopped, the display will show ‘LC’
for 3 seconds.
,
,
