Example:
TIMER ON TIMER OFF
¡
(Off, Start, Stop operation)
This feature is useful when you want to start
the air conditioner before you wake up and
stop it after you leave the house.
To start the air conditioner 2 hours after setting,
and stop it 5 hours after setting.
1. Press the TIMER ON button.
2. Press the TIMER ON button again to display
“2.0H” in the TIMER ON display.
3. Press the TIMER OFF button.
4. Press the TIMER OFF button again to display
“5.0H” in the TIMER OFF display .
5. Wait for approximately 2 seconds and the digital
display area will show the temperature again.
The "TIMER ON OFF" indicator remains on and
this function is activated.
Off
Stop
Start
2 hours later
after setting
5 hours later
after setting
Set
The timer setting (TIMER ON or TIMER
NOTE:
OFF) that occurs directly after the set time will
be activated first.
SLEEP / FRESH function
TIMER ON OFF
Press this button for less than 2 seconds to
initiate the SLEEP function. Pressing this
button for more than 2 seconds and the FRESH
function is initiated.
The SLEEP function enables the unit to automa-
tically increase (cooling) or decrease (heating)
the temperature set point 1 C per hour for the
O
first two hours, then holds it steady for the next
5 hours. After this time, the unit will stop. This
helps to maintain the most comfortable
temperature and save energy.
NOTE: The SLEEP function is only available
under Cooling, Heating and AUTO operations.
1
2
1
TURBO
SELF
CLEAN
SLEEP
FRESH
SILENCE
TIMER
ON
TIMER
OFF
LOCK
RESET
LED
FOLLOW
ME
FAN
SPEED
SWING
MODE
TEMP
SWING
TURBO
SELF
CLEAN
SLEEP
FRESH
SILENCE
TIMER
ON
TIMER
OFF
LOCK
RESET
LED
FOLLOW
ME
FAN
SPEED
SWING
MODE
TEMP
SWING
LED/FOLLOW ME function
Press this button for less than 2 seconds to initiate
the LED function. Press and hold this button for more
than 2 seconds and the FOLLOW ME function is
initiated.
When the FOLLOW ME function is activated,
the remote display is the actual temperature at
its location. The remote control will send this
signal to the air conditioner at 3 minutes
intervals until you press the FOLLOW ME
button again.
The FOLLOW ME function is not available in
DRY and FAN mode.
Switching the operational mode or turning off the
unit will cancel the FOLLOW ME function.
Press this button for less than 2 seconds to initiate
the TURBO function. Press and hold this button for
more than 2 seconds and the SELF CLEAN
function is initiated.
TURBO function enables the unit to reach the
preset temperature in the shortest time. When
you press this button in cooling mode, the unit will
blow strong cool air with a very high fan speed.
In SELF CLEAN mode, the air conditioner
will automatically clean and dry the evaporator
(indoor coil) and keep it fresh for the next operation.
TURBO/SELF CLEAN function
ON/OFF
ON/OFF
