8
To install the
Interface Module:
1. Position in an environmentally protected area where the
temperature does not exceed 70°C.
2. Locate within 1.5m of a 10 Amp 240 volt fixed switched socket
outlet.
3. Distance from
Interface Module
to
Brivis Touch
shall be no
more than 20m.
4. Mount with supplied screws as shown in Diagram 9.
Diagram 9
: Mounting Interface Module on flat surface
2.6
Connection of Interface Module to P&C Loom
The
Interface Module
is capable of connecting up to four
Brivis Touch
Controllers. The
P&C Loom
can be connected
to the
Interface Module
through any of the four ports, refer to
Diagram 10.
Diagram 10
: Connection of Interface Module to P&C Loom
