1 PARTS CHECKLIST
Please retain all packaging until you are certain no parts are missing.
After assembly, please dispose of all packaging carefully.
a. Frame (Front wheels not fitted)
b. Raincover
c. Basket (Fitted)
d. Front Wheel x2
e. Hood
2 FITTING THE WHEELS
With the swivel lock at the top, push each front wheel on the the stroller leg until it clicks into
position.
Check these are secure by pulling downwards.
3 OPENING THE PUSHCHAIR
a. Release the catch that keeps the stroller folded.
b. Holding the handles, lower the front legs.
c. Push firmly down on the lock as shown until the locking bars are straight.
WARNING:
Ensure that all locking devices are engaged before use.
4 HARNESS
a. Locking the harness
Insert loop (A) into (B).
Then push both buckle tongues (A+B) into the buckle housing (C).
b. Adjust the shoulder strap height
Undo the harness completly. Pull the shoulder staps through the rear of the backrest. Thread
the shoulder straps back through the appropriate belt slots (A, B, C).
For children under 6 months, the shoulder straps must run through the lowest belt slots (C).
c. Adjust the waist strap length
To fit the child’s waist, pull both sliders ‚B’ towards the child’s back to secure the loose ends
of the straps.
WARNING:
Always use the crotch strap in combination with the waiste belt.
WARNING:
Use a harness as soon as your child can sit unaided.
5 FITTING THE HOOD
a. Push the clips on the sides of the hood onto the frame above and below where the fabric
is attached to the handle frame.
b. Pull the back of the hood down over the back of the pushchairs backrest. Push the two
tensioning brackets on the sides of the hood until they lock.
c. To remove the hood push the tensioning brackets upwards. Pull the clips on the sides of
the hood off the handle frame.
6 SWIVEL WHEELS
To lock line the wheels up with the stroller and push lever upwards.
To unlock push lever down.
NOTE:
Always apply brake before loading or unloading a child from the pushchair.
Summary of Contents for Aura
Page 2: ...d e A B C B ...
