Britex romer DUALFIX PLUS, User Manual

Page: 8 / 18

4.1.4 Fastening the ISOFIX
1 ISOFIX locking arms 3 ISOFIX indicator
2
release button
4
fastening button
1. Press the locking button 4 and the release button 2 to-
gether and slide the ISOFIX locking arm 1 out as far as
possible.
P
The ISOFIX locking arm 1 audibly locks in place.
2. Slide out the second ISOFIX locking arm 1 out as far as
possible as well.
P
The second ISOFIX locking arm
1
audibly locks in
place.
P
Both ISOFIX locking arms 1 are extended to the maxi-
mum.
3. Connect the ISOFIX locking arms 1 to the ISOFIX in-
stallation bracket on the car seat.
P
Both ISOFIX locking arms 1 audibly lock in place.
P
Both ISOFIX indicators 3 are green.
WARNING Risk of injury from unsecured child seat.
Make sure that both ISOFIX locking arms are fully
locked in place. Both ISOFIX indicators must be green.
4. Clamp the ISOFIX connection by forcefully pushing the
child seat into the back of the car seat.
INFO Clamping the child seat into the car seat reduces
the amount of horizontal movement of the child seat.
The smaller the possible movement, the better the child
will be protected.
5. Increase the tension of the ISOFIX connection by force-
fully pushing forwards on the base station.
INFO We recommend pushing the base station left and
right.
6. Check that the ISOFIX locking arms 1 are both retract-
ed to the same distance.
The positions of the ISOFIX locking arms are
shown on the product using numbers. These num-
bers are located above the ISOFIX indicators. Both
ISOFIX indicators must show the same number.
7. Check that the ISOFIX locking arms 1 are connected
to the ISOFIX installation brackets on both sides by
pulling at the child seat.
P
If neither of the ISOFIX locking arms
1
comes loose,
they are both connected to the vehicle.
4.1.5 Setting support leg
1
Support leg
3
Adjustment button
2 Rotation indicator 4 Support indicator
1. Make sure that the support leg
1
is stilled folded out.
P
The red swivel indicator 2 is no longer visible.
2. Keep holding the adjustment button 3 depressed.
3. Extend the support leg
1
to the floor of the vehicle.
4. Release the adjustment button 3 .
P
The adjustment button 3 audibly locks in place.
P
The protection indicator 4 is green.
P
The bottom of the child seat is on the seat of the car
seat.
IP10036 | 1.3 | 2000036990 DUALFIX PLUS | BRITAX RÖMER 8