6.1.3
Remove cover from the seat
1
Headrest
4
Rubber loops
2
Pushbuttons
5
Plastic cards
3
Velcro
1. Adjust the seat to the flattest position (see "Adjusting
2. Adjust the headrest
1
to the lowest position (see "Ad-
3. Open the pushbuttons
2
on the left and right of the
backrest.
4. Undo the Velcro
3
on the padded crotch.
5. In the leg area, remove the rubber loops
4
and the
plastic cards
5
.
6. Remove the elastic seam of the cover from the edge of
the seat.
7. Thread the shoulder straps through the cutout.
8. Pull the cover from the child seat from bottom to top.
6.1.4
Clean cover
NOTE
Damage to important parts
u
Before washing the seat reducer, remove all foam
ans styrofoam parts from the top and bottom sec-
tions.
u
Do not
wash these parts in the washing machine.
You can remove the following covers and wash them
in the washing machine:
u
Cover of the seat reducer.
u
Cover of the headrest.
u
Seat cover.
u
Note the instructions on the cover's washing label.
u
Wash the cover at 30°C with a mild detergent on the
washing machine’s fine wash machine.
u
You can remove the shoulder pads and wash them with
like warm soapy.
u
You can clean the plastic parts and straps with soapy
water.
u
Do not use strong detergents (such as solvents).
6.1.5
Attach cover
WARNING
Risk of injury due to missing seat cover
The seat cover is an integral safety component of the
child seat. If the seat cover is not used, this may lead to
serious or even fatal injuries.
u
Never use the child seat without the correct seat
cover.
u
Only use the original Britax Römer replacement seat
cover.
u
Replacement seat covers are available from your re-
tailer.
u
To fit the cover again, follow the steps in the reverse or-
der.
WARNING
Risk of injury due to twisted straps.
Twisted straps have a negative impact on the protective
function.
u
Ensure that the straps are tight and not twisted.
u
Ensure that the straps are fitted correctly in the belt
slots of the cover.
IP10036 | 1.3 | 2000036990
DUALFIX PLUS | BRITAX RÖMER
14
