3. Place both shoulder straps
4
over the seat reducer.
4. Hang the two plastic hooks
7
in the loops
1
on the cov-
er of the headrest
2
.
5. Pass the harness buckle
5
and the padded crotch
6
through the recesses in the lower section of the insert
for newborn babies.
3.3
Adjusting the seat angle
1
Adjustment button
2
Seat
You can use the seat forward and backward-facing at
different angles.
1. Pull the adjustment handle
1
forwards and slide the
seat
2
to the desired position.
P
The seat
2
locks in place with a “click”.
2. To check it is locked securely in place, pull on the
seat
2
.
3.4
Change direction of travel
WARNING
Risk of injury from front airbag
Airbags are designed to protect adults. The use of a
front airbag when a seat is facing backwards can lead to
serious or fatal injuries.
u
Disable front airbag.
u
Never
use the seat facing backwards with an active
front airbag.
u
Note and observe the instructions in the vehicle
handbook.
WARNING
Risk of injury if facing in the wrong direction
The alignment of the seat is critical for the safety of the
child. If used incorrectly, even just braking can lead to
serious or even fatal injuries.
u
Do not
use a front-facing child seat if your child is
smaller than 76 cm or younger than 15 months.
u
Britax Römer recommends use the child seat facing
backwards for as long as possible.
u
Before each car journey, ensure that the rotatable
seat of the child seat is locked in place.
1
Seat
3
Rotary button indica-
tor
2
Rotary button
1. To change the direction of travel, press the
rotary button
2
.
2. Turn the seat
1
to the desired direction.
P
The seat audibly locks.
P
The red indicator on the rotary button
3
is no longer vis-
ible.
WARNING
Risk of injury from unsecured seat.
Make sure that the seat is fully locked in place by
pulling at it. Check the red indicators on the rotary but-
ton. It must no longer be visible.
IP10036 | 1.3 | 2000036990
DUALFIX PLUS | BRITAX RÖMER
6
