Briteq STAGE BEAMER RGB, Manual

Page: 20 / 22

18 4 USING A DMX512 CONTROLLER
4.3 BASIC INSTRUCTIONS FOR DMX512 OPERATION (TOUR)
MASTER DIMMER
CH1 controls the intensity of the currently projected color
When the slider is at the highest position (255) the intensity of the output is the
maximum
RED, GREEN & BLUE COLOR SELECTION
CH2, CH3 & CH4 control the intensity ratio of each of the RED, GREEN,
BLUE & WHITE LEDs.
When the slider is at the highest position (255) the intensity of the color is the
maximum.
CH2, CH3, CH4 can be combined together to create over 16 million colors.
COLOR MACROS
CH5 selects the required COLOR MACRO
CH5 has priority over CH2, CH3, CH4 & CH5
CH1 is used to control the intensity of the COLOR MACRO
STROBE
CH 6 controls the strobe of CH1 to Ch5
ID ADDRESS SELECTION
CH10 is used to select the target ID address.
Each independent DMX address may have upto 66 independent ID addresses.
An ID address of 0 will activate all ID address locations.
AUTO
CH7 selects the preset AUTO programs AT.01-AT.10 or the custom AUTO
programs CUS.01-CUS.10
When activating the custom AUTO programs CUS.01 to CUS.10 then it is possible
to control the STEP TIME and FADE TIME using CH2 and CH3 respectively.
CH7 has priority over CH2, CH3, CH4, CH5, CH6.
DIMMER SPEED
Ch9 is for selecting the dimmer mode and dimmer speed. When DIMMER is set
to Off , then RGBW and MASTER DIMMER are linear. The Dim 1/2/3/4 are
different speed of the non linear dimmer .
2009.11.10