Briteq STAGE BEAMER RGB, Manual

Page: 7 / 22

2.1 MOUNTING
HANGING
UPRIGHT
The fixture can be mounted in an upright or
s i t t i n g p o s i t i o n u s i n g t h e s u p p o r t i n g
brackets.
The fixture can be mounted in a hanging
position using the supporting bracket. The
bracket should be secured to the mounting
t r u s s o r s t r u c t u r e u s i n g a s t a n d a r d
mounting clamp. Please note that when
hanging the unit a safety cable should also
be used.
@ 220V: 24 units may be connected in series
@120V: 12 units may be connected in series
The LED MODULE can be mounted at any angle and in any
position. It is possible to further adjust the angle of the LED
MODULE using the two adjustment knobs located on the side of
the fixture.
2.2 POWER CONNECTIONS
5 2 INSTALLATION
Note:
If the signal cable is over 60m between the DMX512 controller and fixture or
beween two fixtures, then a DMX signal amplifier is needed as well.
2 INSTALLATION
2009.11.10