ENGLISH
OPERATION MANUAL
BRITEQ
®
3/7
BT-POWERJET
•
ENTER/STOP button:
used to confirm the selected value. When no dmx cable is connected,
this button will stop the manual working mode
6. DMX INPUT:
3-pin + 5-pin male connector, used to connect the fogger directly to a DMX-controller or to
the previous unit in the DMX chain.
7. BREAKER:
first locate and solve the problem that caused the breaker to be activated. When the
problem is solved, push the button to reset the breaker.
8. MAINS CONNECTOR:
insert the supplied mains cable here and connect it to in a mains wall socket with
earth connection.
9. DMX OUTPUT:
3-pin + 5-pin female connector, used to connect the fogger with the next unit in the DMX
chain.
10. M-DMX INPUT:
Please note that this USB-connector is NOT used for updates or to
connect the unit to a PC! Instead this USB-connector makes it very easy to add wireless
DMX to the unit! Just add the (optional) WTR-DMX DONGLE from BRITEQ
®
and you will
get wireless DMX! Moreover, you will be able to connect other DMX-controlled
equipment to the DMX-output so you can share the wireless DMX function with all
connected units! No extra settings to be made in the setup menu, just follow the
procedure in the user manual supplied with the WTR-DMX DONGLE from BRITEQ
®
. The
separate WTR-DMX DONGLE is available from WWW.BRITEQ-LIGHTING.COM (order
code: 4645)
11. POWER SWITCH:
used to switch the machine ON/OFF
MENU SETTINGS:
READY TO WORK
This message will be shown on the display as soon as the machine is ready to be used.
When the unit is just started up, the heating element of the fogger needs some time to warm up until it
reaches its ideal working temperature. Also the air reservoir needs time to be put under pressure.
DMX512 ADDRESS
Used to set the start address when the unit in used in a DMX chain.
•
Press the MENU button until DMX512 ADDRESS
is shown on the display.
•
Use the DOWN and UP buttons to change the DMX address.
•
Once the correct address is shown on the display, press the ENTER button to confirm.
DMX512 MODE
Used to choose the DMX channel mode.
•
Press the MENU button until DMX512 MODE
is shown on the display.
•
Use the DOWN and UP buttons to change the DMX mode (5CH or 11CH).
•
Once the correct mode is shown on the display, press the ENTER button to confirm.
LED COLOR SETTING FOR MANUAL CONTROL
Used to set the colors that should be produced when the machine is used in MANUAL mode.
A separate setting can be made for the inner led ring and the outer led ring.
•
Press the MENU button until LED COLOR SETTING FOR MANUAL CONTROL
is shown on the display.
•
Press ENTER to move on to the options
•
LED SELECTION INNER LED (or OUTER LED) will appear on the display
•
Use the DOWN and UP buttons to select the desired LED group (INNER LED or OUTER LED)
•
Press ENTER to move on to the available color options for the selected LED group
•
Use the DOWN and UP buttons to select the desired color mode:
•
OFF
•
RED
•
GREEN
•
BLUE
•
YELLOW
•
LIGHT BLUE
•
PURPLE
•
WHITE
•
SLOW SCROLL
•
FAST SCROLL
