Britax Maxi AHR Page 27 Instructions For Installation Manual Download

Page: 27 / 35

Instructions for Installation & Use

- Series No. 8000/B/2010

Instructions for Installation & Use

- Series No. 8000/B/2010

A. Disengage seat belt tongue from buckle and pull seat

belt out of harness strap loops.

B. Disconnect the Harness attachment clip from the

VERSATETHER™ Catch and feed the left hand
Harness Strap out the shoulder slot. Pull the right
hand harness Strap to remove the harness off the
seat. (Store the Protecta PLUS™ Child Harness in a
safe place for later use).

C. Remove the built-in harness from the storage recess

under the cover. Feed crotch strap and shoulder
straps through seat cover.

D. Feed shoulder straps through appropriate shoulder

slots in the seat back and attach to metal Strap
Connector as shown right.

E. When child harness is no longer being used,

disconnect the gated slide so that the seat belt can be
correctly used as a lap-sash seat belt for other users.

RESTORING THE RESTRAINT FOR TODDLER USE

RESTORING THE RESTRAINT

HOW TO INSTALL WITH A CHILD HARNESS

Strap Connector

H. Disengage seat belt tongue and

buckle, remove the lap portion of
seat belt from the SLIDEGUARD™clip
and remove the Child Harness and
seatbelt from child.

NOTE: It maybe easier to unthread the

car seat belt out of the loops before
lifting the child harness over the
child’s head.

TO REMOVE CHILD FROM HARNESS AND SEAT

Lift child harness strap
over child’s head.

FOR LARGE CHILDREN

NOTE: Do not pass the child harness over the headrest
once the child has outgrown the top most shoulder
slots as this can damage the headrest parts.

Note: Cease using this
child restraint when the
child’s shoulders reach
the Upper Shoulder
Height Marker with
the headrest in the top
position.

CHILD USE

(BOOSTER SEA

T MODE WITH CHILD HARNES

Summary of Contents for Maxi AHR




































Search results

Summary of Contents for Maxi AHR

Reviews:

Related manuals for Maxi AHR

Brands by name

Popular brands

Britax Maxi AHR, Instructions For Installation Manual

Search results

Summary of Contents for Maxi AHR

Reviews:

Related manuals for Maxi AHR

Brands by name

Popular brands