Instructions for Installation & Use
- Series No. 8000/B/2010
Instructions for Installation & Use
- Series No. 8000/B/2010
42
CHILD USE
(BOOSTER SEA
T MODE WITH CHILD HARNES
S)
43
HOW TO INSTALL WITH A CHILD HARNESS
HOW TO INSTALL WITH A CHILD HARNESS
Installing into vehicle with an extension strap
Hook the Harness clip first onto the extension strap catch, then hook the extension strap hook onto the
VERSATETHER™ Catch on the Booster Seat’s upper anchorage strap as shown below. Ensure that
none of the straps are twisted or catching on sharp edges. Tighten the Booster Seat’s upper anchorage
strap (refer to page 36) then remove excess slack from the extension strap by pulling the adjuster
strap as illustrated below.
Always attach the hook and remove the slack.
Pull to remove
slack
Attachment Clip attaches
to the VERSATETHER™
Catch
To lengthen the Adjustable Extension strap rotate the
adjuster and pull the main strap.
6
2
4
5
7
3
7
1
Pull to remove
slack
Pull to
lengthen
Rotate the
Adjuster to
lengthen
1
2
4
1. Attachment Clip from Child Harness.
2. VERSATETHER™ Catch.
3. Booster seat Attachment Clip.
4. Anchor Fitting in the car.
Child Harness Attachment Clip
attaches to the VERSATETHER™
Catch
3
1
Installing into vehicle without extension strap
Hook the Child Harness attachment clip (1) onto VERSATETHER™ Catch (2). Then hook attachment
clip (3) onto anchor fitting. Ensure that none of the straps are twisted and not passing over any sharp
edges.
CHILD USE
(BOOSTER SEA
T MODE WITH CHILD HARNES
S)
