Installation: Rear-Facing
12
Rear-Facing
Lap-Shoulder Belt Installation
•
Figure A illustrates a typical rear-facing
lap-shoulder belt installation.
•
When not in use, always store the LATCH
connectors in storage pouches sewn in
cover above rear-facing lock-offs.
1
Place the child restraint rear-facing and
in full recline position on the vehicle seat .
2
Open rear-facing lock-off farthest from
where the vehicle belt will be buckled .
3
Pull the vehicle belt out, then pass it
through the first rear-facing belt slot (
Fig.
B
) .
•
The vehicle belt can be routed over or
under the cover.
4
Route vehicle belt behind and under
the buckle strap, then through the
second rear-facing belt slot .
5
Verify that the vehicle belt is not
twisted, then buckle (
Fig. C
) .
6
Push the restraint firmly into the seat
while removing slack from the lap portion
of the vehicle belt, then the shoulder
portion (
Fig. D
) .
B
C
A
