Instructions for Installation & Use -
Series No. HP4050A-020133
Instructions for Installation & Use -
Series No. HP4050A-020133
18
19
HOW TO SETUP
HOW TO SETUP
ADJUSTING THE SASH
GUIDE POSITION
A. The sash guide needs to be positioned
in-line with or just above the child's
shoulders.
B. Remove trim at the top rear of the
restraint, then pull the cover forward
to reveal the sash guide which is
attached to a strap at the back of the
seat cover.
C. Align the sash guide with the slot just
below the child's shoulder and on the
same side as the sash belt is connected
to the car. Thread the sash guide
through the slot in the seat cover and
refit the seat cover to the restraint.
Smaller children will generally use the
lowest slot.
Sash
guide
slots
Sash
guide
slots
The sash guide should be used to correctly
position the sash portion of the lap-sash
seatbelt across the child's shoulder and
chest.
Feed the adjusting strap into the slot on the
cover that is just below the child's shoulder.
Adjust the height of the sash guide so that
the guide is above the child's shoulder.
ALWAYS
USE
THIS
SASH
GUIDE
Hold the sash
guide and pull
strap to shorten
To Lengthen
To Shorten
Hold the strap,
rotate and pull
the sash guide
to lengthen
Sash
guide
Thread the
sash guide
through the
chosen slot
in the seat
cover.