CARE & MAINTENANCE
45
TO REMOVE COVER:
A.
Remove the restraint from vehicle.
B.
Disengage harness tongues from harness
buckle.
C.
Remove any accessories such as the Infant
Safety Cushion™ Insert and Ez Buckle System.
D.
Remove headrest cover by unclipping the press
studs on the headrest hardware, peel the elastic
loops from behind the headrest. Pull the headrest
slightly forward and peel headrest trim away from
the seat.
E.
To remove the cover, unhook elastic loops from
behind the restraint and at the front of the restraint
underneath the stabilising bar.
Remove plastic flaps from the both sides of
the cover (next to air cushion). Peel away from
restraint while feeding through the harness adjuster
button moulding, harness tongues and strap
through the lap and crotch strap slots in the cover
and over the headrest moudling.
Peel away
from headrest
D
NOTE:
The restraint is fitted with Side Impact Cushions,
the headrest trim has elastic which pulls over the Side
Impact Cushions that can be easily removed and replaced.
Unhook elastic loops from the
back of the restraint
E
E
Remove
plastic
flaps from
both sides
of restraint
Unclip press
studs
Summary of Contents for 7200/A/2010
Page 58: ...58 NOTES ...
Page 59: ...59 NOTES ...
